Tftp Server Name - ZyXEL Communications EX5501-B0 User Manual

Click Network Setting > Home Networking > Wake on LAN to open this screen.
Figure 79 Network Setting > Home Networking > Wake on LAN
The following table describes the labels in this screen.
Table 38 Network Setting > Home Networking > Wake on LAN
LABEL
Wake by
Address
IP Address
MAC Address
Wake up

8.8 TFTP Server Name

Use the TFTP Server Name screen to identify a TFTP server for configuration file download using DHCP
option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP address or the
host name of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 80 Network Setting > Home Networking > TFTP Server Name
Chapter 8 Home Networking
DESCRIPTION
Select Manual and enter the IP address or MAC address of the device to turn it on remotely. The
drop-down list also lists the IP addresses that can be found in the Zyxel Device's ARP table. If you
select an IP address, the MAC address of the device with the selected IP address then displays in
the MAC Address field.
Enter the IPv4 IP address of the device to turn it on.
This field is not available if you select an IP address in the Wake by Address field.
Enter the MAC address of the device to turn it on. A MAC address consists of six hexadecimal
character pairs.
Click this to send a WoL magic packet to wake up the specified device.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
140