Reset The Nsa-2400; Figure 12 Generate Password - ZyXEL Communications NSA-2400 User Manual

Chapter 2 Introducing the Web Configurator

Figure 12 Generate Password

Click login to go to the NSA-2400 screen and enter the new e-mailed password there. You
should change this password and then write down your new password and put it in a safe
place.
Log in With New Password

2.6.2 Reset the NSA-2400

Alternatively, if you forget your password or cannot access the web configurator, use the
RESET button at the front of the NSA-2400. You will NOT lose all NSA-2400 configurations
but the IP address, subnet mask and admin password are all returned to the factory defaults.
You should check that the RESET button is enabled in the Maintenance >
Configuration screen.
2.6.2.1 Procedure To Use The Reset Button
1 Press and hold the RESET button until you hear a beep, and then release it.
38
NSA-2400 User's Guide