Editing An Internal Volume; Creating A New External Volume; Figure 41 Edit An Internal Volume; Table 20 Edit An Internal Volume - ZyXEL Communications NSA-220 User Manual

Chapter 6 Storage Screens
Table 19 Create a New Internal Volume (continued)
LABEL
Apply
Cancel

6.7 Editing an Internal Volume

Click an internal volume's Edit icon in the Volume screen as shown in
to change the internal disk drive volume's name.

Figure 41 Edit an Internal Volume

The following table describes the labels in this screen.

Table 20 Edit an Internal Volume

LABEL
Volume Name
Type
Configuration
Capacity
Apply
Cancel

6.8 Creating a New External Volume

Click the Create a New External Volume button in the Volume screen as shown in
on page 61
70
DESCRIPTION
Click this button to save your changes back to the NSA and create the
volume.
Click this button to begin configuring this screen afresh.
DESCRIPTION
Type a volume name from 1 to 31 characters. The name cannot be the
same as another existing external volume.
Acceptable characters are all alphanumeric characters and " " [spaces],
"_" [underscores], and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
This displays Internal Volume indicating that the volume is on a hard disk
installed in the NSA.
This field shows total disk size, the percentage of the volume being used
and the percentage that is available.
Click this button to save your changes back to the NSA and create the
volume.
Click this button to begin configuring this screen afresh.
to create a new NSA internal disk drive volume.
Figure 38 on page 61
Figure 38
NSA-220 User's Guide