Table of Contents
Advertisement
Chapter 42 Commands
Table 89 Commands (continued)
CLASS
COMMAND
shdsl 15mperf
shdsl 1dayperf
igmpsnoop info
igmpsnoop group
igmpsnoop port info
igmpsnoop port group
rmon
rstp
vlan
mac
port
dot1x
enet
ip
dhcp counter
dhcp snoop
config
show
save
restore
exit
264
PARAMETERS
DESCRIPTION
<portlist> [count <0..96>] Displays line performance
statistics for the current and
previous 15-minute periods.
<portlist>
Displays line performance
statistics for the current and
previous 24 hours.
[clear]
Display protocol packets counters
& number of learned groups
[<vid> [<mcast_ip>]]
Display IGMP learned group
member information
[<portlist> [clear]]
Display received protocol packets
counters, number of joined
groups.
<portlist>
Display joined groups in this port
stats|history enet1|enet2
Display uplink/subtending link
RMON information
(STUC mode only)
[vlanlist]
Displays current VLANs.
Displays current MAC address
forwarding table.
<portlist> [<vpi> <vci>]
This command displays and/or
[clear]
erases port statistics.
[portlist]
(STUC mode only)
Displays Ethernet port settings
and statistics.
Displays a management port's
status and performance data.
[<portlist> [clear]]
(STUC mode only) Display DHCP
statistics for a port
<portlist>
(STUC mode only) Display
snooping
<sys|sw|ip|stat|all>
Displays the device's
[nopause]
configuration.
Saves the current configuration.
Reloads the factory default
configuration.
Ends the console or telnet
session.
P
M/L
M/L
L/L
L/L
L/L
L/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/~
L/L
L/L
M/L
H/H
H/H
L/L
IES-708-22A User's Guide
Advertisement
Table of Contents
Troubleshooting
