ZyXEL Communications IES-22A User Manual page 158

Chapter 19 Static Multicast
Table 43 Advanced Application > Static Multicast (continued)
LABEL
Index
MAC Address
1~8
Join All
Leave All
Delete
Adding new entry
Add
158
DESCRIPTION
This is the static multicast group index number.
This is the multicast MAC address.
These fields display the static multicast group membership status of the DSL
ports.
"V" displays for members and "-" displays for non-members.
Click a DSL port's status to change it (clicking a "V" changes it to "-" and vise
versa).
Click Join All to make all of the DSL ports members of the static multicast
group.
Click Leave All to remove all of the DSL ports from the static multicast group.
Click Delete to remove a static multicast group.
Type a multicast MAC address in the field, and click the Add button to create a
new static multicast entry. Multicast MAC addresses must be
01:00:5E:xx:xx:xx , where
01:00:5E:10:10:10 is a valid multicast MAC address.
Clicking Add saves your changes to the IES-708-22A's volatile memory. The
IES-708-22A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
x is a "don't care" value. For example,
IES-708-22A User's Guide