ZyXEL Communications IES-22A User Manual page 256

Chapter 42 Commands
Table 89 Commands (continued)
CLASS COMMAND
igmpsnoop mvlan group
set
igmpsnoop mvlan group
delete
igmpsnoop mvlan group
show
igmpfilter set
igmpfilter show
igmpfilter profile set
igmpfilter profile delete
igmpfilter profile show
queuemap show
queuemap set
garptimer show
garptimer join
garptimer leave
garptimer leaveall
rstp show
rstp enable
rstp disable
rstp priority
rstp hellotime
256
PARAMETERS DESCRIPTION
<vid> <index> (STUC mode only) Create a
<start_mcast_ip> multicast to VLAN translation
<end_mcast_ip> entry.
up to 16 entries
<index>: 1~16,
Note: IP address in each entry
should be disjointed
<vid> <index> (STUC mode only) Delete a
multicast to VLAN translation
entry.
<vlanlist> (STUC mode only) Show a
multicast to VLAN translation
entry.
<portlist> <name> (STUC mode only) Sets a DSL
port(s) to use an IGMP filter
profile.
[portlist] (STUC mode only) Displays which
IGMP filter profile an DSL port(s)
is using.
<name> <index> (STUC mode only) Configures an
<startip> <endip> IGMP filter profile.
<name> (STUC mode only) Removes an
IGMP filter profile.
[name] (STUC mode only) Displays an
IGMP filter profile's settings.
Displays the system's priority level
to physical queue mapping.
<priority> <queue level> Maps a priority level to a physical
queue.
(STUC mode only) Display the
system's garp settings.
<join msec> (STUC mode only) Set system's
garp join time.
<leave msec> (STUC mode only) Set system's
garp leave time.
<leaveall msec> (STUC mode only) Set system's
garp leaveall time.
(STUC mode only) Display the
system's rstp settings.
(STUC mode only) Turn system's
rstp on.
(STUC mode only) Turn system's
rstp off.
<priority> (STUC mode only) Set system
rstp's priority.
<hellotime sec> (STUC mode only) Set system
rstp's hello time.
P
H/H
H/H
M/L
H/H
M/L
H/H
H/H
M/L
M/L
H/H
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/H
IES-708-22A User's Guide