ZyXEL Communications IES-22A User Manual page 257

Table 89 Commands (continued)
CLASS COMMAND
rstp maxage
rstp fwdelay
rstp port show
rstp port enable
rstp port disable
rstp port priority
rstp port pathcost
dhcprelay show
dhcprelay enable
dhcprelay disable
dhcprelay server set
dhcprelay server delete
dhcprelay server active
dhcprelay relaymode
dhcprelay option82
enable
dhcprelay option82
disable
dhcprelay option82 set
dhcprelay opt82sub2
enable
IES-708-22A User's Guide
PARAMETERS DESCRIPTION
<maxage sec> (STUC mode only) Set system
rstp's max age.
<fwdelay sec> (STUC mode only) Set system
rstp's forward delay time.
(STUC mode only) Display enet
port rstp status.
<portlist> (STUC mode only) Set enet port
to enable rstp.
<portlist> (STUC mode only) Set enet port
to disable rstp.
<portlist> <priority> (STUC mode only) Set enet port's
rstp priority.
<portlist> <pathcost> (STUC mode only) Set enet port's
rstp pathcost.
(STUC mode only) Displays
DHCP relay settings.
(STUC mode only) Turns on
DHCP relay.
(STUC mode only) Turns off
DHCP relay.
<vid> <primary-server> (STUC mode only) Set DHCP
[<secondary-server>] server IP address where the
DHCP request will forward to
<vid>: VLAN
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
<vid> [<primary-server>] (STUC mode only) Delete DHCP
server for 1 VLAN
<vid> <active-server> (STUC mode only) Activate
primary or secondary DHCP
server for 1 VLAN
<mode> (STUC mode only) <mode>: auto,
both
(STUC mode only) Turns on the
DHCP relay agent information
(Option 82) feature.
(STUC mode only) Turns off the
DHCP relay agent information
(Option 82) feature.
<relay info> (STUC mode only) Adds the
specified information for the relay
agent.
(STUC mode only) Turns on
option 82 sub-option 2
Chapter 42 Commands
P
H/H
H/H
M/L
H/H
H/H
H/H
H/H
L/L
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
M/H
257