ZyXEL Communications IES-22A User Manual page 178

Chapter 24 Port Authentication
Table 54 Advanced Application > Port Authentication > 802.1x (continued)
LABEL
Cancel
Port
Enable
Control
Reauthentication
Reauthentication
Period(s)
Apply
Cancel
178
DESCRIPTION
Click Cancel to begin configuring this screen afresh.
This field displays a port number.
Select this check box to turn on IEEE 802.1x authentication on this port.
Select AUTO to authenticate all subscribers before they can access the network
through this port.
Select FORCE AUTHORIZED to allow all connected users to access the
network through this port without authentication.
Select FORCE UNAUTHORIZED to deny all subscribers access to the network
through this port.
Specify if a subscriber has to periodically re-enter his or her username and
password to stay connected to the port.
Specify how often a client has to re-enter his or her username and password to
stay connected to the port.
Click Apply to save your changes to the IES-708-22A's volatile memory. The
IES-708-22A loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
IES-708-22A User's Guide