ZyXEL Communications IES-22A User Manual page 110

8-port g.bis mini-dslam
Table of Contents

Advertisement

Chapter 13 xDSL Port Setup
Table 20 Basic Setting > xDSL Port Setup > VC Setup (continued)
LABEL
PVID
Priority
Add
Apply
Cancel
Show Port
Index
Port
VPI/VCI
US / DS VC Profile
PVID
Priority
110
DESCRIPTION
Type a PVID (Port VLAN ID) to assign to untagged frames received on this
channel.
Use the drop-down list box to select the priority value (0 to 7) to add to incoming
frames without a (IEEE 802.1p) priority tag. An asterisk (*) denotes a super
channel.
Click this to add or save channel settings on the selected port. (The name of the
button depends on whether or not you have clicked on a PVC number in the
Index column.)
This saves your changes to the IES-708-22A's volatile memory. The IES-708-
22A loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to start configuring the screen again.
Select the number of a DSL port for which to display VC settings (or display all
of them).
This field displays the number of the PVC. Click a PVC's index number to use
the top of the screen to edit the PVC.
Note: At the time of writing, you cannot edit the VPI and VCI. If
you want to change them, add a new PVC with the desired
settings. Then you can delete any unwanted PVCs.
This field displays the number of the DSL port on which the PVC is configured.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
This shows which VC profile this channel uses for downstream traffic shaping.
The VC profile for upstream policing also displays if the channel is configured to
use one.
This is the PVID (Port VLAN ID) assigned to untagged frames or priority frames
(0 VID) received on this channel. An asterisk (*) denotes a super channel.
This is the priority value (0 to 7) added to incoming frames without a (IEEE
802.1p) priority tag. An asterisk (*) denotes a super channel.
IES-708-22A User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ies-708Ies-708-22a

Table of Contents