ZyXEL Communications IES-22A User Manual page 250

Chapter 42 Commands
Table 89 Commands (continued)
CLASS COMMAND
timeserver sync
log show
log clear
wdog show
wdog set
monitor show
monitor enable
monitor disable
monitor vlimit
monitor tlimit
user online
user enable
user disable
user set
user delete
user show
user auth
user server
shdsl
show
250
PARAMETERS DESCRIPTION
Retrieves the date and time from
the time server.
Displays the device's logs.
Clears the device's logs.
Displays the current watchdog
firmware protection feature status
and timer.
<msec|0:disable> Sets the watchdog count. 0 turns
the watchdog off.
Displays the hardware monitor's
statistics.
Turns the hardware monitor on.
Turns the hardware monitor off.
<idx> <high> <low> Sets the maximum (<high>) or
minimum (<low>) voltage at the
specified voltage sensor. You can
specify a voltage with up to three
digits after a decimal point (0.941
for example).
Normal voltage at each sensor:
Idx: 1=1.8v, 2=3.3v, 3=15v
<idx> <high> <low> Sets the maximum (<high>) or
minimum (<low>) temperature at
the specified temperature sensor.
You can specify a temperature
with up to three digits after a
decimal point (-50.025 for
example).
Temperature sensor locations:
Idx: 1=DSL, 2=CPU, 3=HW
monitor
Displays online user info.
<name> Turns on the specified user name
of multi-login.
<name> Turns off the specified user name
of multi-login.
<username> Creates or edits the password and
<password> privilege level of the specified
<high|middle|low> user name.
<name> Removes the specified user name
of multi-login.
Displays the authentication mode,
RADIUS server settings and user
info.
<local|radius|landr> Set authentication method.
<ip> <port> <secret> Set remote authentication server
[high|middle|low|deny] IP address and secret
[portlist] Displays the SHDSL settings.
P
H/H
M/L
H/H
H/~
H/~
L/L
H/H
H/H
H/H
H/H
M/~
H/H
H/H
H/H
H/H
M/L
H/H
H/H
L/L
IES-708-22A User's Guide