ZyXEL Communications IES-22A User Manual page 260

Chapter 42 Commands
Table 89 Commands (continued)
CLASS COMMAND
dot1x radius ip
dot1x radius port
dot1x radius secret
dot1x profile show
dot1x profile set
dot1x profile delete
enet show
enet speed
enet name
enet enable
enet disable
enet reset
smcast show
smcast set
smcast delete
isolation show
isolation enable
isolation disable
isolation daisychain
isolation standalone
dscp show
260
PARAMETERS DESCRIPTION
<ip> (STUC mode only) Set Radius
server IP.
<port> (STUC mode only) Set Radius
server port.
<secret> (STUC mode only) Set Radius
server secret.
(STUC mode only) Display
accounts for profile mode.
<name> <password> (STUC mode only) Set account
and password for profile mode.
<name> (STUC mode only) Remove
account for profile mode.
Displays the Ethernet port
settings.
<portlist> Sets the Ethernet port(s)
<100copper|10copper|au connection speed.
to>
<portlist> <name> Sets the Ethernet port(s) name.
<portlist> Turns on the specified Ethernet
port(s).
<portlist> Turns off the specified Ethernet
port(s).
<portlist> Reset the ENET interface.
Display all MAC addresses joined
to DSL ports.
<dsl_port> <mac> Use join/leave to add/ remove
<join|leave> multicast MAC addresses on
specified DSL ports, a range of
DSL ports or all DSL ports. MAC
example: 01005E010203
<mac> Removes a static multicast filter
entry by deleting the associated
MAC address.
(STUC mode only) Displays the
subscriber isolation feature's
current setting.
(STUC mode only) Turns the
subscriber isolation feature on.
(STUC mode only) Turns the
subscriber isolation feature off.
(STUC mode only) Set switch
mode to daisychain mode
(STUC mode only) Set switch
mode to standalone mode (STUR
mode is default enabled as
isolation standalone mode)
[portlist] (STUC mode only) Displaying per
port DSCP setting
P
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
H/H
H/H
L/L
IES-708-22A User's Guide