ZyXEL Communications IES-22A User Manual page 201

Table 65 Advanced Application > PPPoA to PPPoE > Status (continued)
LABEL
Service Name
Counter Status
Tx/Rx
PPP LCP
Config-Request
PPP LCP Echo-
Request
PPP LCP Echo-
Reply
PPPoE PADI
PPPoE PADO
PPPoE PADR
PPPoE PADS
PPPoE PADT
PPPoE Service
Name Error
PPPoE AC
System Error
PPPoE Generic
Error
IES-708-22A User's Guide
DESCRIPTION
This field specifies the name of the service that uses this PVC.
The values in these columns are for packets transmitted (
by the IES-708-22A.
This field displays the number of config-request PDUs received by the IES-708-
22A from the CPE (client) device.
This field displays the number of echo-request PDUs received by the IES-708-
22A from the CPE (client) device.
This field displays the number of echo-reply PDUs received by the IES-708-22A
from the CPE (client) device.
This field displays the number of padi PDUs sent by the IES-708-22A to the
BRAS.
This field displays the number of pado PDUs sent by the BRAS to the IES-708-
22A.
This field displays the number of padr PDUs sent by the IES-708-22A to the
BRAS.
This field displays the number of pads PDUs sent by the BRAS to the IES-708-
22A.
This field displays the number of padt PDUs sent and received by the IES-708-
22A.
This field displays the number of service name errors; for example, the IES-708-
22A's specified service is different than the BRAS's setting.
This field displays the number of times the access concentrator experienced an
error while performing the Host request; for example, when resources are
exhausted in the access concentrator. This value does not include the number
of times the IES-708-22A checks the AC name field in the BRAS's reply PDU
and finds a mismatch, however.
This field displays the number of other types of errors that occur in the PPPoE
session between the IES-708-22A and the BRAS.
Chapter 29 PPPoA to PPPoE
tx ) or received ( rx )
201