ZyXEL Communications IES-22A User Manual page 258

Chapter 42 Commands
Table 89 Commands (continued)
CLASS COMMAND
dhcprelay opt82sub2
disable
dhcprelay opt82sub2 set
vlan show
vlan portshow
vlan set
vlan enable
vlan disable
vlan delete
vlan pvid
vlan priority
vlan gvrp
vlan frametype
vlan cpu show
vlan cpu set
mac flush
mac agingtime show
mac agingtime set
mac antispoofing show
mac antispoofing enable
mac antispoofing disable
mac count show
258
PARAMETERS DESCRIPTION
(STUC mode only) Turns off
option 82 sub-option 2
<relay info> (STUC mode only) Adds the
specified information for sub-
option 2
<vlanlist> Displays VLAN settings.
[portlist] Displays the port(s) VLAN
settings.
<vid> Configures a VLAN entry.
<portlist>:<F<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N> ...] [name]
<vid> Turns on a VLAN entry.
<vid> Turns off a VLAN entry.
<vlanlist> Removes a VLAN entry.
<portlist> <pvid> Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
<portlist> <priority> Sets a port's default IEEE 802.1p
priority.
<portlist> (STUC mode only) Set the port(s)
<enable|disable> to enable or disable gvrp.
<portlist> <all|tag> Sets the specified DSL port to
accept tagged, untagged or
Ethernet frames (or both).
Note: enet1, enet2 are fixed at
'all'.
Displays the VLAN ID of the
management VLAN.
<vid> Sets the VLAN ID of the
management VLAN.
Clears learned MAC addresses
from the forwarding table.
Displays the MAC aging out time
period.
<sec, Sets the MAC aging out time
10..10000|0:disabled> period.
(STUC mode only) Show the MAC
antispoofing status
(STUC mode only) Turns on the
MAC antispoofing
(STUC mode only) Turns off the
MAC antispoofing
[portlist] (STUC mode only) Displays the
system's current MAC address
count settings.
P
M/H
M/H
M/L
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
M/~
H/~
H/H
M/L
H/H
M/L
H/H
H/H
M/L
IES-708-22A User's Guide