GS-3012F User's Guide
The following table describes the LEDs on the front panel.
LED
COLOR STATUS
BPS
Green
PWR
Green
SYS
Green
ALM
Red
GBIC Slot
LNK
Green
ACT
Green
Gigabit Port
LNK, ACT
Green
Amber
Green
and
Amber
3-6
Figure 3-8 Front Panel LEDs
Table 3-2 Front Panel LED Descriptions
Blinking The system is receiving power from the backup power supply.
On
The backup power supply is connected and active.
Off
The backup power supply is not ready or not active.
On
The system is turned on.
Off
The system is off.
Blinking The system is rebooting and performing self-diagnostic tests.
On
The system is on and functioning properly.
Off
The power is off or the system is not ready/malfunctioning.
On
There is a hardware failure.
Off
The system is functioning normally.
On
The link to this port is up.
Off
The link to this port is not connected.
Blinking This port is receiving or transmitting data.
Blinking The system is transmitting/receiving to/from an Ethernet network.
On
The link to a 1000 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from an Ethernet network.
On
The link to a 100 Mbps Ethernet network is up.
Blinking The system is transmitting/receiving to/from an Ethernet network.
DESCRIPTION
Hardware Connections