Figure 29-34 Speed-Duplex Command Example - ZyXEL Communications Dimension GS-3012F User Manual

<auto|10-
half|10-
full|100-
half|100-
full|1000-
full>
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the speed to 10 Mbps in half duplex mode.
GS-3012F(config)# interface 1,3-5
GS-3012F(config-interface)# speed-duplex 10-half
Command Examples
Sets the duplex mode (half, full) and speed (10/100/1000 Mbps) of the
connection on the interface. Selecting auto (auto-negotiation) makes one port
able to negotiate with a peer automatically to obtain the connection speed
and duplex mode that both ends support.

Figure 29-34 speed-duplex Command Example

Dimension GS-3012F Gigabit Ethernet Switch
29-17