ZyXEL Communications Dimension GS-3012F User Manual page 181

https
multi-login
plt
mac-aging-time
cluster
mac-flush
<port-num>
erase running-config
boot config <index>
reload config <index>
write memory
copy running-config tftp
<ip> <remote-file>
Introduction to CLI
Table 28-2 Command Summary: Enable Mode
COMMAND
known-hosts
key
<rsa1|rsa|dsa>
session
session
certificate
key <rsa|dsa>
timeout
candidates
member mac <mac-
addr>
member
members config
<index>
Dimension GS-3012F Gigabit Ethernet Switch
DESCRIPTION
Displays known SSH hosts information.
Displays the SSH public and private keys
Displays current SSH session(s).
Displays the HTTPS information.
Displays current HTTPS session(s).
Displays the HTTPS certificates.
Displays the HTTPS key.
Displays the HTTPS session timeout.
Displays multi-login information
Displays Packet Loop Test (PLT).
Displays MAC learning aging time.
Displays cluster management status.
Displays cluster candidate information.
Displays the MAC address of the cluster
member(s).
Displays the status of the cluster
member(s).
Displays the configuration of the cluster
member(s).
Clears the MAC address table.
Removes all learned MAC address on
the specified port(s).
Resets to the factory default settings.
Performs a system cold start, checks the
hardware and restarts using the specified
configuration file.
Performs a system warm start, checks
the configuration and restarts using the
specified configuration file.
Saves the configuration to the
configuration file the switch is currently
using.
Saves the configuration to the specified
configuration file on the switch.
Backs up running configuration to the
specified TFTP server with the specified
file name.
28-9