Supported Mibs; Table 17-3 Snmp Traps; Configuring Snmp - ZyXEL Communications Dimension GS-3012F User Manual

COMMAND
Set Allows the manager to set values for object variables within an agent.
Trap Used by the agent to inform the manager of some events.
17.3.1

Supported MIBs

MIBs let administrators collect statistics and monitor status and performance.
The GS-3012F supports the following MIBs:
SNMP MIB II (RFC 1213)
RFC 1493 Bridge MIBs
RFC 1155 SMI
17.3.2 SNMP Traps
The GS-3012F sends traps to an SNMP manager when an event occurs. SNMP traps supported are outlined in the
following table.
GENERIC TRAP
0 (Cold Start)
1 (WarmStart)
2 (linkDown)
3 (linkUp)
4 (authenticationFailure)
17.3.3

Configuring SNMP

From the Access Control screen, display the SNMP screen. You can click Access Control to go back to the
Access Control screen.
Access Control
Table 17-2 SNMP Commands

Table 17-3 SNMP Traps

SPECIFIC TRAP
0
0
0
0
0
DESCRIPTION
RFC 1157 SNMP v1
RFC 1643 Ethernet MIBs
SNMPv2, SNMPv2c
Bridge extension MIBs RFC 2674
This trap is sent when the GS-3012F is turned on.
This trap is sent when the GS-3012F restarts.
This trap is sent when the Ethernet link is down.
This trap is sent when the Ethernet link is up.
This trap is sent when an SNMP request comes from non-
authenticated hosts.
GS-3012F User's Guide
DESCRIPTION
17-3