24.1 Diagnostic
Click Management and then Diagnostic in the navigation panel to display this screen. Use this screen to check
system logs, ping IP addresses or perform loopback tests on a port.
The following table describes the labels in this screen.
LABEL
System Log
Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
IP Ping
Type the IP address of a device that you want to ping in order to test a connection.
Click Ping to have the switch ping the IP address (in the field to the left).
Ethernet Port
From the Port drop-down list box, select a port number and click Port Test to perform internal
Test
loopback test.
Diagnostic
This chapter explains the Diagnostic screens.
Figure 24-1 Diagnostic
Table 24-1 Diagnostic
DESCRIPTION
GS-3012F User's Guide
Chapter 24
Diagnostic
24-1