Getting To Know The Gs-3012F; Introduction; Features; Hardware Features - ZyXEL Communications Dimension GS-3012F User Manual

1.1 Introduction

The GS-3012F is a layer 2 stand-alone Gigabit Ethernet switch with 12 mini GBIC slots for optical uplinking, four
10/100/1000Mbps ports and one console port and RJ-45 port for local management.
With its built-in web configurator, managing and configuring the switch is easy. From cabinet management to port-
level control and monitoring, you can visually configure and manage your network via the web browser. Just click
your mouse instead of typing cryptic command strings. In addition, the switch can also be managed via Telnet, the
console port, or third-party SNMP management.

1.2 Features

The next two sections describe the hardware and firmware features of the GS-3012F.
1.2.1

Hardware Features

Power
The GS-3012F DC model requires DC power supply input of -48 VDC to -60 VDC, 1.2A Max. The GS-3012F AC
model requires 100~240VAC/1.5A power.
12 Mini GBIC Slots
These are slots for mini GBIC (Gigabit Interface Converter) transceivers. These allow the GS-3012F to connect to
another WAN switch or daisy-chain to other switches.
Four 10/100/1000 Mbps Gigabit Ports (with four paired with the mini GBIC ports)
Connect up to four computers or switches directly to the 10/100/1000Mbps auto-negotiating, automatic cable
sensing (auto-MDIX) Gigabit ports. All ports support:
IEEE 802.3/3u/3z/3ab standards
Back pressure flow control in half duplex mode
IEEE 802.3x flow control in full duplex mode
Console Port
Use the console port for local management of the switch.

Getting to Know the GS-3012F

Getting to Know the GS-3012F
This chapter describes the key features, benefits and applications of the GS-3012F.
GS-3012F User's Guide
Chapter 1
1-1