Figure 10-2 Spanning Tree Protocol: Configuration; Configuring Stp - ZyXEL Communications Dimension GS-3012F User Manual

GS-3012F User's Guide
LABEL
Port ID
Topology Changed
Times
Time Since Last Change This is the time since the spanning tree was last reconfigured.
Poll Interval(s)
Stop
10.2.1

Configuring STP

To configure STP, click the Configuration link in the Spanning Tree Protocol screen as shown next.
The following table describes the labels in this screen.
10-4
Table 10-3 Spanning Tree Protocol: Status
This is the priority and number of the port on the switch through which this switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to halt STP statistic polling.

Figure 10-2 Spanning Tree Protocol: Configuration

DESCRIPTION
Spanning Tree Protocol