Figure 3-4 Opening The Transceiver's Latch Example; Figure 3-5 Transceiver Removal Example; Management Port - ZyXEL Communications Dimension GS-3012F User Manual

GS-3012F User's Guide
Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
Open the transceiver's latch (latch styles vary).
1.
Pull the transceiver out of the slot.
2.
3.2.4

Management Port

The MGNT (management) port is used for local management. Connect directly to this port using an Ethernet cable.
You can configure the switch via Telnet or the web configurator.
The default IP address of the management port is 192.168.0.1 with a subnet mask of 255.255.255.0.
3-4

Figure 3-4 Opening the Transceiver's Latch Example

Figure 3-5 Transceiver Removal Example

Hardware Connections