ZyXEL Communications Dimension GS-3012F User Manual page 185

cluster
ssh
https
multi-login
vlan-type <802.1q|port-based>
ip route
name-server
address default-
gateway
address
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Introduction to CLI
Table 28-3 Command Summary: Configure Mode
COMMAND
Dimension GS-3012F Gigabit Ethernet Switch
option
information
member <mac-
address>
key <rsa1|rsa|dsa>
known-hosts <host-
ip> <cr>
known-hosts <host-
ip> [1024|ssh-
rsa|ssh-dsa]
timeout
<ip> <mask>
<next-hop-ip>
<ip> <mask>
<next-hop-ip>
[metric <metric>]
[name <name>]
[inactive]
<ip>
<ip>
<ip> <mask>
DESCRIPTION
Disables the relay agent
information option 82.
System name is not appended to
option 82 information field.
Disables cluster management on
the switch.
Removes the cluster member.
Deletes the secure shell server
encryption key and regenerates a
new key. Your switch supports
SSH versions 1 and 2 using RSA
and DSA authentication.
Removes the specified remote
hosts from the list of all known
hosts.
Removes remote known hosts with
the specified public key (1024-bit
RSA1, RSA or DSA).
Resets the session timeout to the
default of 300 seconds.
Disables another administrator
from logging into Telnet or the CLI.
Specifies the VLAN type.
Creates a static route.
Sets the metric of a static route or
deactivates a static route.
Sets the IP address of a domain
name server.
Sets the default gateway's IP
address for the out-of-band
management port.
Sets the IP address and subnet
mask of the out-of-band
management port.
Configures a static MAC address
forwarding rule.
28-13