Figure 29-21 Interface Bpdu-Control Command Example; Figure 29-22 Broadcast-Limit Command Example - ZyXEL Communications Dimension GS-3012F User Manual

<peer|tunnel|d
iscard|network
>=
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.
GS-3012F(config)# interface 1,3-5
GS-3012F(config-interface)# bpdu-control tunnel
GS-3012F(config-interface)#
29.8.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
<pkt/s>
An example is shown next.
Enable port one for configuration.
Enable broadcast control.
Set the number of broadband packets the interface receives per second
GS-3012F(config)# interface 1
GS-3012F(config-interface)# broadcast-limit
GS-3012F(config-interface)# broadcast-limit 21
29.8.4 bandwidth-limit
Syntax:
bandwidth-limit
bandwidth-limit egress <Mbps>
bandwidth-limit ingress <Mbps>
where
Command Examples
Type peer to process any BPDUs received on these ports.
Type tunnel to forward BPDUs received on these ports.
Type discard to drop any BPDUs received on these ports.
Type network to process and forward BPDUs with a VLAN tag and
to process untagged BPDUs.

Figure 29-21 interface bpdu-control Command Example

Enables broadcast storm control limit on the switch.
Sets how many broadcast packets the interface receives per second.

Figure 29-22 broadcast-limit Command Example

Dimension GS-3012F Gigabit Ethernet Switch
29-11