ZyXEL Communications Dimension GS-3012F User Manual page 190

Dimension GS-3012F Gigabit Ethernet Switch
timesync
loginPrecedence <LocalOnly |
igmp-snooping
bcp-
transparency
queue
storm-control
bandwidth-
control
mac-aging-time <10-3000>
snmp-server
logins
service-control icmp
28-18
Table 28-3 Command Summary: Configure Mode
COMMAND
<daytime|time|ntp>
server <ip>
LocalRADIUS |
RADIUSOnly>
level <0-7>
priority <0-7>
[contact <system
contact>] [location
<system location>]
get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination
<ip>
username <name>
password <pwd>
snmp
http <socket-
number> <timeout>
telnet <socket-
number>
ftp <socket-number>
DESCRIPTION
Sets the time server protocol.
Sets the IP address of your time
server.
Select which database the switch
should use (first) to authenticate a
user.
Enables IGMP snooping.
Enables Bridge Control Protocol
Transparency.
Sets the priority level-to-physical
queue mapping.
Enables broadcast storm control
on the switch.
Enables bandwidth control.
Sets learned MAC aging time.
Sets the geographic location and
the name of the person in charge
of this switch.
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to four
stations to send your SNMP traps
to.
Configures up to four read-only
login accounts.
Allows ICMP access to the switch
such as pinging and tracerouting.
Allows SNMP management.
Allows HTTP access on the
specified service port and defines
the timeout period.
Allows Telnet access on the
specified service port.
Allows FTP access on the
specified service port.
Introduction to CLI