Server Configuration - ZyXEL Communications ZyAIR B-4000 User Manual

Hot spot gateway
Hide thumbs Also See for ZyAIR B-4000:
Table of Contents

Advertisement

LABEL
Connect on Demand
Keep Alive
PPTP
My IP Address
My Subnet Mask
Gateway IP address
PPTP Server IP
Address
Username
Password
PPP MTU Setting
TCP MSS Setting
Connection ID/Name
Connect on Demand
Keep Alive
Apply
4.9

Server Configuration

Use the SERVER screen to set the embedded web server, the LAN DHCP server and specify the e-mail
server for e-mail redirection on the ZyAIR.
WAN, LAN and Server Setup
Table 4-1 WAN/LAN
Select this option when you don't want the connection up all the time and specify
an idle timeout in the Max Idle Time field. This is the default setting with an idle
timeout of 10 minutes.
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field. When disconnected, the ZyAIR
will attempt to bring up the connection after the redial period.
Select this option to activate PPTP support. Refer to Section 4.7 for more
information.
Enter the IP address assigned to you.
Enter the subnet mask assigned to you.
Enter the IP address of the gateway device.
Enter the IP address of your ISP's PPTP server.
Enter the user name exactly as your ISP assigned. If assigned a name in the
form
user@domain
where domain identifies a service name, then enter both
components exactly as given.
Enter the password associated with the user name above.
Enter the MTU (Maximum Transfer Unit) size.
Enter the MSS (Maximum Segment Size) size.
Enter your identification name of the PPTP server assigned to you by the ISP.
Select this option when you don't want the connection up all the time and specify
an idle timeout in the Max Idle Time field. This is the default setting with an idle
timeout of 10 minutes.
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field. When disconnected, the ZyAIR
will attempt to bring up the connection after the redial period.
Click Apply to save the changes.
ZyAIR B-4000 Hot Spot Gateway
DESCRIPTION
4-7

Advertisement

Table of Contents
loading

Table of Contents