Figure 131 Time Zone Dialog Box - Nortel BayStack Instant Internet 100-S Using Manual

Chapter 10 Instant Internet unit configuration, support, and diagnostics
6
To use an NTP server for the date and time, select the Enable NTP check box
and then do one of the following:
• To set the time using an NTP server, click Add. Enter the domain name or
IP address of the NTP server, and then click OK.
• To change from one NTP server to another, select the server to be
changed, and then click Change. Enter the IP address or domain name of
the new NTP server, and then click OK.
• To remove an NTP server, select the server to be removed. Click Remove,
and then click Yes.
When you use an NTP server for the time and date, the Instant Internet unit
checks that server every 12 hours for the correct time. If you have a dial-up
connection, this check occurs only when a line is up.
You can view the "NTP log" provided in Setup to verify that the correct server
supplied the time and any adjustments.
7 Click Time Zone.
The Time Zone dialog box opens

Figure 131 Time Zone dialog box

8 Select the time zone.
• To automatically adjust the unit's clock for daylight savings time, select
the check box.
9
Click OK through all dialog boxes.
10 In the main Setup window, click Save and Exit.
Using the BayStack Instant Internet Management Software Version 7.11
(Figure 131).
287