Figure 77 Dhcp Configuration Dialog Box - Nortel BayStack Instant Internet 100-S Using Manual

3
Select the DHCP check box.
4
Click Configure.
The DHCP Configuration dialog box opens

Figure 77 DHCP Configuration dialog box

5
In the Scopes area, click Add.
The Scope Configuration dialog box opens
range of addresses for the Instant Internet unit to use. You can also specify any
addresses within that range that you want to exclude.
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 5 Advanced IP configuration
(Figure 77).
(Figure 78), where can you add a
153