This procedure provides instructions for configuring the HyperTerminal terminal
emulation software.
Caution: If you are configuring the unit, wait for LED 2 to glow amber
before you proceed.
To create a HyperTerminal PC connection profile:
1
Start the HyperTerminal software.
The Connection Description dialog box opens
Figure 8 HyperTerminal Connection Description dialog box
2
In the Name box, enter a name for the connection.
3
In the Icon area, select an icon for the connection.
4
Click OK.
The Connect To dialog box opens
Chapter 7 Out-of-band management support
(Figure
(Figure
9).
Setting Up the BayStack Instant Internet 400-S Unit
67
8).