Server Name Errors; Winsock.dll Errors - Nortel BayStack Instant Internet 100-S Using Manual

In this case, the most typical problem is hardware-related. Be sure to check all
cables to ensure that they are connected properly.
IP address restricted
Incoming port restricted
News group restricted
RAW sockets restricted
Host name restricted
These errors indicate that the user does not have access to the item or area
indicated. The user must be given permission to access that item or area. Refer to
"Defining user and group access" on page

Server name errors

The following error messages indicate that the Instant Internet unit's name is not
properly configured in the winsock.ini file, or that there is no server= entry in the
winsock.ini file.
No server names
Server name not configured
Server name syntax error
Do one of the following:
• Run the Instant Internet Installation program.
• Start the Run program and enter install /select. The winsock.ini file is
configured with the server name.

Winsock.dll errors

The following error messages indicate internal problems with the winsock.dll file.
Note the error number.
Workstation has not been initialized
Error initializing access
To run Internet applications properly, Instant Internet requires the winsock.dll that
comes with the product.
Using the BayStack Instant Internet Management Software Version 7.11
Appendix A Troubleshooting and error messages
54.
311