Configuring Ipx Frame Types; Figure 115 Select Ipx Frame Types Dialog Box - Nortel BayStack Instant Internet 100-S Using Manual

Configuring IPX frame types

By default, Instant Internet enables support for all IPX frame types. You can,
however, enhance performance slightly by turning off certain frame types if you
know that they are not used.
To select the frame types you want the Instant Internet unit to support:
1
Start Setup, and if prompted, select a unit to configure.
2
Choose Support > IPX Frame Type.
The Select IPX Frame Types dialog box opens

Figure 115 Select IPX Frame Types dialog box

3
Do the following:
•
•
4
Click OK.
Select the check boxes of the frame types you want the Instant Internet
unit to use.
Clear the check boxes of the frame types you do not want the Instant
Internet unit to use.
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 9 IPX configuration and support
(Figure
261
115).