When the Log window is active, you can select any of the toolbar buttons in
Table
17.
Table 17 Log
window
Button
Description
Refreshes the display to view up-to-the-minute information for
the selected Instant Internet unit.
Clears all data from the log. After you select Clear, there is no
user activity shown in this log until the next access.
Exports data to a specified file for use at a later date. This option
is useful before clearing the Connection Log.
The Log menu contains options for the above buttons, and it also contains the
following options:
•
Lookup Addresses – Changes the IP addresses to their host names.
Note: If you leave Lookup Addresses set, it takes a while for the initial
Log window to open, especially if there are a lot of entries.
•
Forget password – If you select the Remember Password option when you
are prompted for a password for an Instant Internet unit, this option cancels
that selection.
•
Forget all passwords – If you select the Remember Password option when
you are prompted for a password for an Instant Internet unit, this option
cancels that selection for all Instant Internet units.
Table 18
describes the sort options when the Log window is open.
Table 18 Sort options in the log window
Item
Description
ID
Sorts the log, alphabetically, by user ID.
Time
Sorts the log, chronologically, by date and time of event.
Reverse sort
Reverses the current sort order.
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 3 Internet activity logging
toolbar buttons
103