Creating Two Vlans "Byport; Configuring Ipx Network Numbers; Figure 61 Ipx Routing With Atm 1483 Pvcs - Nortel Passport Module 8672A Using Manual

136 Chapter 6 Configuring the Passport 8672ATM Module

Figure 61 IPX routing with ATM 1483 PVCs

This configuration requires the following procedures:
• "Creating two VLANs
• "Configuring IPX network numbers" on page 136
• "Enabling IPX forwarding" on page 138
• "Enabling IPX network number forwarding" on page 139
• "Configuring a null-encapsulation PVC" on page 140
• "Associating the PVC with the VLAN" on page 140

Creating two VLANs "byPort"

To create two VLANs "byPort," see
ports" on page
VLAN can have one or multiple Ethernet ports.
One VLAN must have only one ATM port.
The second VLAN can have one or multiple Ethernet ports.

Configuring IPX network numbers

To configure the IPX network numbers for both VLANs:
209195-A
Passport
OA
Note: Each configured ATM 1483 PVC uses one VLAN. The Passport
8672ATM Module can be configured for a maximum of 256 VLANs per
MDA and a maximum of 512 VLANs per card.
119. One VLAN must have only one ATM port. The second
ATM Switches
ATM VC1
OB
"byPort"," next
"Creating a VLAN "byPort" and adding
Passport /
Router
ATM VC1
OB
9939EB
OC