Table of Contents
Advertisement
Using the Control Panel
Parallel Menu
Item
BI-DIRECTION
IO TIMEOUT
BI-DIRECTION
Sets whether or not to enable bi-directional communication. It is not
generally necessary to change this setting. However, depending on
the PC you are using, bi-directional communication may not be pos-
sible. If your PC does not support bi-directional communication, set
this setting to Off.
IO TIMEOUT
An
IO Timeout
code for a print job that was sent from the computer. The
out
setting acts as a timer that allows the printer a specified period
of time in which to determine if a document has finished printing or
not.
If an
IO Timeout
that still remains inside of the printer is output and the printer
returns to the READY mode. When the
data that remains inside of the printer is erased and the printer
returns to the READY mode.
3-14
Factory Default
ON
15 SEC
occurs when the printer cannot detect the final data
occurs when the
User Selection
ON, OFF
5 SEC, 10 SEC,
15 SEC, 20 SEC,
30 SEC, 60 SEC,
120 SEC, 180 SEC,
240 SEC, 300 SEC
setting is enabled, all data
PCL
PS
setting is enabled, all
IO Time-
Advertisement
Table of Contents
