Replacing The Paper Feed Roller - Minolta PageWorks Pro 25 User Manual

Replacing the Maintenance Kit

Replacing the Paper Feed Roller

1
Pull out Tray 1 as far as it will go and press down on the paper
lifting plate until it clicks into place.
2
The paper feed roller rests on a bar to one side of Tray 1. The
bar is secured by two clips, one at the end of the bar (on the end
facing away from the inside of the tray) and one that rests against
the side of the roller (the side with the rubber casing). Remove
both clips from the bar as shown in the illustration.
6-16