Table of Contents
Advertisement
Service man Call Messages
Should one of the messages below be displayed on the LCD, turn the
printer off and on again. If the problem persists, contact Minolta
technical support.
Caution
• If the message "FATAL ERROR 33 FUSER" is displayed on the LCD,
turn off the printer and contact Minolta technical support immediately.
Panel Display
FATAL ERROR 1
ROM
FATAL ERROR 2
POSTSCRIPT ROM
FATAL ERROR 3
INTERNAL RAM
FATAL ERROR 4
RAM SIMM (number)
FATAL ERROR 5
EEPROM
FATAL ERROR 7
NETWORK CARD
FATAL ERROR 8
ENGINE I/F
FATAL ERROR 9
NETWORK I/F
FATAL ERROR 21
ENGINE EEPROM
FATAL ERROR 22
VSYNC
FATAL ERROR 23
HSYNC
FATAL ERROR 24
OPTION I/F
FATAL ERROR 25
MAIN MOTOR
Read error with ROM.
Read error with PostScript SIMM.
Write and read error with RAM.
Write and read error with RAM SIMM.
*1
(Number) shows the slot number on the
controller board.
Write and read error with EEPROM.
Network card error.
Engine communication error.
Network communication error.
EEPROM error on the controller board.
VSYNC error.
HSYNC error from engine.
Communications error between the printer
and the optional unit.
Main motor error.
Printer Messages
Description
7-37
Advertisement
Table of Contents
