Installing The Duplex Kit; Installing The Manual Feed Unit - Minolta PageWorks Pro 25 User Manual

Laser printer
Hide thumbs Also See for PageWorks Pro 25:
Table of Contents

Advertisement

This section describes the optional items that are available for this
printer: manual feed unit, duplex unit, 5-bin mail-bin, 500-sheet
paper feed unit, 250-sheet paper feed unit, 2500 sheet tray (LCC),
10-bin mail-bin, SIMMs, network interface card, Adobe PostScript
SIMM and hard disk drive.
Caution
• Removing any screws other than those specified in this manual may
result in hazardous radiation exposure.

Installing the Duplex Kit

The duplex kit consists of the manual feed unit and the duplex unit.
The manual feed unit must be installed before installing the duplex
unit. The following sections describe the installation procedure for
both components.

Installing the Manual Feed Unit

The manual feed unit allows you to print on paper that is fed directly
into the printer, one sheet at a time. The use of this optional feature is
recommended whenever you are printing on unusually delicate paper
that requires special handling.
1
Remove the manual feed unit from its carton and remove its pro-
tective, plastic covering.
2
Remove all of the protective shipping foam and tape from the
unit, including the plastic covering that protects the connector
cord.
3
Turn the printer off and disconnect the power cord and interface
cable from the printer.
Installing the Duplex Kit
8-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pageworks 25

Table of Contents