Image Shift Problem
The following situations may cause documents to be printed out of
place (too far to the right/left or too high/low) on the page:
Situation
When documents are printed
using the incorrect size of paper.
When the surface of the paper
feed roller becomes worn.
When the margin settings of the
specified tray need to be
adjusted.
Image Shift Problem
Solution
Load the correct size of paper and try again.
Replace the paper feed roller (see Chapter 6:
Replacing the Paper Feed Roller).
Adjust the top and/or left offset value(s). For
instructions, see Chapter 3: Adjusting the Top
Margin or Adjusting the Left Margin.
7-25