Installing the 10-bin Mail-bin
This unit utilizes up to ten shelves for outputting printed documents
from the printer.
Note
• In order to install the 10-bin mail-bin, it is necessary for the printer to
be aligned with the height of the sorter. The printer should either be con-
figured with stacked trays as shown in the figure below, or in such a
manner that the printer and the 10-bin mail-bin are the same height.
1
Turn the printer off and disconnect the power cord and interface
cable from the printer.
2
Remove the horizontal transport unit from the carton.
Remove the shipping tape (1 and 2) from the unit.
Installing the 10-bin Mail-bin
1
2
8-25