Connecting Other Sources; Cable Indications; The Video Conversion Function - Denon AVR-1707 Operating Instructions Manual

ENGLISH

Connecting Other Sources

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
Audio cable
A
Analog connections (Stereo)
(White)
L
(Red) R
Pin-plug cable
B
Analog connections (Monaural, for subwoofer)
Pin-plug cable
C
Digital connections (Coaxial)
(Orange)
Coaxial cable (75 Ω/ohms pin-plug cable)
D
Digital connections (Optical)
Optical fiber cable
E
Speaker connections
Speaker cable
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
F
Video connections
L (Yellow)
R
Video cable (75 Ω/ohms video pin-plug cable)
G
S-Video connections
H
Component video connections
(Green)
(Blue)
(Red)
Audio signal
Video signal
Video cable
S-Video cable
(Y)
(P /C )
B B
(P /C )
R R
Component video cable
Signal direction
IN OUT OUT IN
IN OUT OUT IN
13
ENGLISH

The video conversion function

With the AVR-1707, the Video signal and the S-Video signal which
were inputted are mutually converted. And also the Video signal and
the S-Video signal which were inputted are converted into a higher
quality.
The flow of the video signals.
(Component Video
terminals)
(S-Video terminal)
(Video terminal)
This unit's input This unit's output
terminals
(Component Video
terminals)
(S-Video terminal)
(Video terminal)
terminals