Table of Contents
Advertisement
Setting up Polled Transmission
Polled Transmission is when you set up your MFC to wait with an
original document so another fax machine can call and retrieve it.
1
If it is not illuminated in green, press
original document that is going to be retrieved.
2
Menu
Press
3
Press
Off ).
Set
Press
.
4
1
Press
for Doc to leave the paper original document waiting in
the ADF.
—OR—
2
Press
for Memory to scan the original document into the
memory.
5
1
Press
if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
2
Press
if you have finished choosing settings, and go to step 6.
6
Start
Press
If you chose Memory in Step 4, the MFC starts scanning the
original document.
■
If you press
ADF until your MFC is polled. If you must use your MFC
before the polled transmission occurs, you must first cancel
this job.
■
If you press
and can be retrieved from any other fax machine until you
delete the fax in memory by using the Canceling a Job
setting. (See Canceling a scheduled job on page 6-9.)
2
2
6
,
,
,
.
or
to choose On (or
.
1
in Step 4, the original document remains in the
2
in Step 4, the original document will be stored
Fax
(
). Load the
Setup Send
6.Polled TX
SETUP SEND 6 - 17
Advertisement
Table of Contents
