Real Time Transmission; Overseas Mode - Brother MFC-9460CDN User Manual

Chapter 3

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
• If the memory is full and you are sending a
black and white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to Off). If
the memory is full, faxes from the scanner
glass cannot be sent until you clear some
of the memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose On.
Press OK.
16
Downloaded from ManualsPrinter.com Manuals
Sending in real time for the next fax
3
only
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose Next Fax:On.
Press OK.
Not sending in real time for the next
fax only
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose Next Fax:Off.
Press OK.

Overseas Mode

If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
This is a temporary setting, and will only be
active for your next fax.
3
a
Make sure you are in Fax mode
.
b
Load your document.
c
Press Menu, 2, 2, 9.
d
Press a or b to choose On or Off.
Press OK.
3
.
3
.
3
.