Performing A Reset - Avaya P580 User Manual

Chapter 3

Performing a Reset

Web Agent
Procedure
CLI Command
3-16
You can reset your switch from either the Web Agent or the CLI.
* Note: You must reset your switch after licensing an
80-Series modules.
To reset your switch using the Web Agent:
* Note: You can also reset your switch using the Module Reset button
located on the Supervisor module. See the Installation Sheet
that came with the Supervisor Module for details.
1. Select System Reset from the System group on the Web Agent window.
The System Reset Page dialog box opens
Figure 3-11. System Reset Page Window
2. Select Save to save your Running Configuration
(Running-Config to the startup configuration
(Startup-Config before performing a system reset.
* Note: If you do not save your Running-Config to Startup-
Config before you reset the switch, you will lose all
of the modifications you made.
3. Click YES to reset the switch, or NO to cancel the operation.
To reset your switch using the CLI, enter the following command from Priv
mode:
# reset
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
(Figure 3-11).