Displaying And Maintaining Snmp - 3Com 4510G Configuration Manual

To do...
Configure the holding time of
the traps in the queue
An extended linkUp/linkDown trap is the standard linkUp/linkDown trap (defined in RFC)
appended with interface description and interface type information. If the extended messages are
not supported on the NMS, disable this function to let the device send standard linkUp/linkDown
traps.
If the sending queue of traps is full, the system will automatically delete some oldest traps to
receive new traps.
The system will automatically delete the traps whose lifetime expires.

Displaying and Maintaining SNMP

To do...
Display SNMP-agent system
information, including the contact,
location, and version of the
SNMP
Display SNMP agent statistics
Display the SNMP agent engine
ID
Display SNMP agent group
information
Display basic information of the
trap queue
Display the modules that can
send traps and whether their trap
sending is enabled or not
Display SNMP v3 agent user
information
Display SNMP v1 or v2c agent
community information
Display MIB view information for
an SNMP agent
Use the command...
snmp-agent trap life seconds
Use the command...
display snmp-agent sys-info [ contact |
location | version ]*
display snmp-agent statistics
display snmp-agent local-engineid
display snmp-agent group [ group-name ]
display snmp-agent trap queue
display snmp-agent trap-list
display snmp-agent usm-user [ engineid
engineid | username user-name | group
group-name ] *
display snmp-agent community [ read |
write ]
display snmp-agent mib-view [ exclude |
include | viewname view-name ]
16-8
Remarks
Optional
120 seconds by default
Remarks
Available in
any view