Page 2
3rd Party Licenses This software is based in part on the work of the Independent JPEG Group Copyright (C)2009-2013 D. R. Commander. All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• The product packaging is recyclable. • Parts are designed for reuse and recycling. • The Kodak i24x0 / i26x0 / i28x0 Scanners are Energy Star compliant and are shipped from the factory with the default time set to 15 minutes.
EMC statements United States: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Included with each model is Smart Touch functionality which allows you to send your documents to email, print or various applications with the touch of a button. The i24x0 / i 26x0 / i28x0 Scanners also support the optional Kodak A3 Size Flatbed Accessory or Kodak Legal Size Flatbed Accessory.
NOTE: This User’s Guide provides information and procedures for the Kodak i24x0 / i 26x0 / i28x0 Scanners. The information in this guide is for use with all scanner models unless otherwise noted. A-61677 May 2015...
• Scanning Setup Guides — the TWAIN Datasource and ISIS Driver are included with the Kodak i24x0 / i 26x0 / i28x0 Scanners. The Scanning Setup Guides explain how to use basic image processing features and is provided on the Installation CD in PDF format.
Scanner components The Kodak i24x0 / i 26x0 / i28x0 Scanners have a graphical display and look like the illustration below. The Kodak i2400/i2420 Scanner is the same as the illustration below except there is a function window which is smaller than the graphical display.
Page 10
6 Up and Down Scroll buttons — allows you to select or scroll through predefined functions or applications by pressing the Up or Down scroll buttons. NOTE:The LED/Start button, Scroll button and Function window are used with Smart Touch functionality. 7 Output tray —...
Page 11
Inside view 1 Scanner cover release lever — opens the scanner to allow access to the paper path for cleaning or clearing a document jam. The scanner must be in the tilted position to open the scanner cover. 2 Gap release lever — allows you to manually adjust the space between the feed module and separation module for documents that require special handling, e.g., documents that are badly torn.
NOTE: If you have already performed all of the steps in the Installation Guide, skip this section. Installing the Kodak Driver 1. Insert the Kodak i24x0 / i26x0 / i28x0 Scanners Installation CD in Software: Windows the CD-ROM drive. The installation program starts automatically.
5. Click Finish when the installation is complete. 6. Remove the Installation CD from the CD-ROM drive. Installing the Kodak Driver Linux drivers can be found on the Kodak Alaris website. Visit Software: Linux operating www.kodakalaris.com/go/disupport to obtain the most recent Linux systems drivers and installation procedures.
Page 14
4. Plug the other end of the power cord into the wall outlet. NOTE: The green LED on the power supply indicates the power is 5. Attach the USB cable to the scanner USB port, located on the back of the scanner. 6.
Turning on the scanner • Momentarily press the toggle button on the back of the scanner to turn the scanner on. When you turn on the scanner, the LED/Start button on the front of the scanner will flash as the scanner goes through a series of self tests. Please wait while the operating system synchronizes the scanner with the installed software.
3 Scanning Contents Getting your scanner ready to scan ..........3-1 Getting your documents ready to scan ........... 3-3 Selecting your scanning application ..........3-4 Scanning with Smart Touch ............3-5 Getting your scanner 1. Be sure the scanner is on and ready to scan (LED/Start button will be green and constant).
Page 17
3. Adjust the side guides (by sliding them in or out) to accommodate the size of documents you are scanning. 4. Adjust the input tray. You can scan documents with the input tray open or closed. Feed documents with the input tray open if you are scanning a batch of documents.
Page 18
5. Adjust the output tray to accommodate your scanning needs. The output tray has several positions and extensions. Two end stops are available to accommodate document stacking. Lift these end stops as needed for scanning small or longer documents. Input tray extension for thick stacks or long documents...
Page 19
Selecting your Smart Touch — Kodak provides Smart Touch functionality which allows you to quickly and easily perform common scanning tasks; such scanning application • scan and share incoming client correspondence with a co-worker in a branch office • create a searchable PDF of a printed report •...
Page 20
- complete with text, graphics, columns and tables. NOTE: Smart Touch may have been installed when you installed the Kodak Driver Software. The scanning applications listed above are provided on separate CDs that were included with your scanner. Refer to the application’s User’s Guide for instructions on how to install and use it.
4 Maintenance Contents Opening the scanner cover............. 4-1 Cleaning procedures............... 4-2 Cleaning the rollers ..............4-2 Cleaning the separation module..........4-3 Cleaning the feed module ............4-4 Vacuuming the scanner.............. 4-5 Cleaning the imaging area ............4-6 Running a transport cleaning sheet..........4-6 Replacement procedures ...............
“Supplies and consumables” at the end of this chapter provides a listing of the supplies required to clean your scanner. IMPORTANT: Only use cleaners such as those provided through Kodak Parts Services. Do not use household cleaners. Allow surfaces to cool to ambient temperature before use.
Cleaning the separation The separation module should be removed from the scanner for best module cleaning results. 1. Push the separation module up to snap out and lift it out of position. 2. Manually rotate and wipe the separation module tires with a roller cleaning pad.
Cleaning the feed module NOTE: Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Pull against the raised edge of the feed module cover and lift it up and out of position. 2.
4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. See the “Replacement procedures” for more information. 5. Use a vacuum or cleaning pad to remove dust and debris from the feed module area.
Cleaning the imaging area 1. Wipe the upper and lower imaging area using a Brillianze Detailer wipe (Step 1) or Staticide wipe. Be careful not to scratch the imaging area when cleaning. IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin.
Replacement Kodak Scanners use replaceable tires that can feed a wide range of document types, sizes and thicknesses. Tire life and performance will procedures vary based on the customer’s document set, the frequency of cleaning the paper path and tires, and following the recommended schedule for changing tires.
Page 28
2. While holding onto the separation module, rotate the release lever back so you can access the separation roller. CAUTION: Use caution as the release lever is spring-loaded and will snap back if you do not hold it in place. 3.
Replacing the pre- 1. Remove the separation module from the scanner by following the separation pad steps previously described in “Replacing the separation module and tires”. 2. Hold the separation module in both hands and locate the two side tabs which protrude slightly from the back of the separation module. 3.
Replacing the feed module NOTE: The paper present sensor is located to the right of the feed and tires module. Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Lift the tab of the feed module cover and remove it from its position. 2.
Page 31
4. Remove each tire by sliding the tire off the core assembly. 5. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 6. Replace the core assembly in the feed module. You may need to slide the shaft to the right or left so the core fits properly within the feed module housing.
Kodak Digital Science Roller Cleaning Pads (qty 24) 853 5981 Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783 Staticide Wipes for Kodak Scanners (qty 6 boxes of 24) 896 5519 This product is not available in all countries. Brillianize Detailer Wipes / for Kodak Scanners...
5 Troubleshooting Contents Problem solving ................5-1 LED codes ..................5-3 Indicator lights................. 5-3 Contacting Service................5-3 Problem solving Occasionally you may encounter a situation with your scanner where it may not function properly. Use the chart below as a guide to check possible solutions to help you resolve the situation before calling Technical Support.
Page 34
Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image or use the Kodak White Background Accessory. Red, green or blue streaks are running The scanner is dirty and needs to be cleaned. Refer to the “Cleaning through a color photo procedures”...
Following is a list of the codes that may be displayed in the LCD display with a corresponding message. NOTE: If you have a Kodak i2400 or i2420 Scanner, only the code will be displayed in the Function window. Codes...
This appendix provides scanner specifications and system requirements. Scanner Type/Speed • Kodak i2400 Scanner — a duplex scanner which provides black and white, grayscale and color scanning up to 30 pages per minute/60 images per minute (throughput speeds may vary depending on driver, at 200 and 300 dpi.
Page 37
Recommended Daily i2400: 4000 pages per day Volume i2600: 6000 pages per day i2800: 8000 pages per day i2420: 5000 pages per day i2620: 7000 pages per day i2820: 8000 pages per day Illumination Dual LED Multifeed Detection Ultrasonic Electrical requirements 100 - 240 V (international), 50/60 Hz Scanner Dimensions Height: 246 mm / 9.7 in.
System requirements Following is the Windows minimum recommended system configuration to run Kodak i24x0 / i26x0 / i28x0 Scanners. • Recommended processor and memory: Intel Core-2 Duo, 6600, 2.4 GHz per processor or equivalent, 4 GB RAM • Supported operating systems:...
Page 39
Kodak Alaris or through Kodak Alaris’ authorized distribution channels: Kodak Alaris Inc. warrants that a Kodak Scanner, from the time of sale through the Limited Warranty period applicable to the Product, will be free of defects in materials or workmanship and will conform to the performance specifications applicable for the particular Kodak Scanner.
Page 40
Warranty Service descriptions Kodak Alaris offers a range of service programs to support its Limited Warranty and to assist with the use and care of the Kodak Scanner (“Service Methods”). A Kodak Scanner represents an important investment. Kodak Scanners provide the productivity needed to stay competitive.
Page 41
Scanners must obtain a Return Material Authorization number (“RMA”) by calling (800) 822-1414, and within ten (10) business days from the date of issuance of the RMA must return the Kodak Scanner to the address designated in the RMA at the end user’s own expense and risk.
Page 42
Website: www.kodakalaris.com/go/docimaging For U.S. Service, Repair and Technical Assistance by Telephone: Telephone technical support is available Monday-Friday between the hours of 5 a.m. to 5 p.m. excluding Kodak Alaris holidays. Phone: (800) 822-1414 For Technical Documentation and FAQ’s available 24 hours a day: Website: www.kodakalaris.com/go/docimaging...