Inverting Positive And Negative Values (Scale Inversion) - Omron ZX-T Operation Manual

Inverting Positive and Negative Values
(Scale Inversion)
This function changes the amount that the measured value on the display changes as the
amount of displacement changes. For the default setting, the display value increases when the
Sensor Head plunger is pressed.
Options
OFF (default) The display value increases when the plunger is pressed.
ON The display value decreases when the plunger is pressed.
Moving to FUN and INV
1.
Set the mode switch to FUN.
2.
Use the LEFT and RIGHT Keys to display
INV on the main display.
Selecting the Display
3.
Press the UP or DOWN Key.
The sub-display will flash.
Description
Display value
(mm)
0.5
0
Actual displacement
− 0.5
0 0.5
Display value
(mm)
0.5
0
Actual displacement
− 0.5
0 0.5
(mm)
Section 5
DETAILED SETTINGS
(mm)
POWER ZERO ENABLE
(mm)
SUB
ZX-T
Operation Manual
75