Pressing Force Alarm - Omron ZX-T Operation Manual

Pressing Force Alarm

When the pressing force of the plunger exceeds the rated measurement distance by 1% or
more, OVER will be displayed on the main display to indicate that the plunger is pressing too
hard. (The HIGH and LOW indicators will also light.)
Too much pressing force will cause damage. Adjust the detection position of the Sensor Head.
HIGH and LOW indicators
light simultaneously
Be careful if an external device is connected because the HIGH and LOW judgement outputs will
also turn ON simultaneously when the Pressing Force Alarm operates.
4 V
0 V
4 V
ON
HIGH
OFF
ON
LOW
OFF
PREPARATIONS FOR MEASUREMENT
POWER ZERO
HIGH
LOW
SUB
Displacement direction
−
+
(Released) (Pushed)
0 mm
Rated measurement distance
ENABLE
(mm)
20 mA
12 mA
4 mA
Operation Manual
Section 2
ZX-T
37