Actuators - Omron ZX-T Operation Manual

APPENDICES

Actuators

Actuators are replaceable (order separately). Select the correct actuator for the sensing
object. Replace worn actuators for more precise measurements.
The ZX-TDS10T-@@ can be used only with the D5SN-TN1 and D5SN-TF1.
Replacing Actuators, p. 113
Selecting Actuators
Model
Appear-
ance
Applica-
tion
Model
Appear-
ance
Applica-
tion
ZX-T
112
Operation Manual
Ball type (steel)
(carbide steel)
D5SN-TB1
Female screw
M2.5 × 0.45
General-purpose Measurement object:
measurement on a flat Carbide steel (HR90)
surface (Actuators or softer materials
attached as standard)
Pin type
(carbide steel) (carbide steel)
D5SN-TN1
Male screw
M2.5 × 0.45
Measurements for the Measurement of
bottom of grooves spherical surfaces
and holes
(Requires conversion
(Requires conversion adapter)
adapter)
Ball type
Ball type (ruby)
D5SN-TB3
D5SN-TB2
Female screw
Female screw
M2.5 × 0.45
M2.5 × 0.45
Measurement object:
Carbide steel (HR90)
or softer materials
Ball type
D5SN-TF1
Male screw
M2.5 × 0.45
Conversion adapter
D5SN-TA
Through hole, female
×
screw M2.5 0.45
Material:
Stainless steel
Mounting commercial
actuators