Omron ZX-T Operation Manual page 61

Section 4
MAIN APPLICATIONS AND SETTING METHODS
Mounting to the Device
Connecting Amplifier Units
Connect two Amplifier Units by placing a Calculating Unit between them as shown in
the diagram below.
The calculation result is displayed on (i.e. output to) the CH2 Amplifier Unit. Connect
the CH2 output cable to the external device to enable external control.
Connections, p. 30
The CH1 Amplifier Unit will display (output) the measurement result for the CH1 Sensor Head only.
Mounting Sensor Heads to the Inspection Device
Refer to the following diagram and prepare mounting jigs. Mount the Sensor Heads
parallel to each other.
Installing Sensor Heads, p. 26
ZX-T
58
Operation Manual
Calculating Unit
CH1 CH2
Mounting jigs