Omron ZX-T Operation Manual page 56

Mounting to the Device
Connecting Amplifier Units
Connect two Amplifier Units by placing a Calculating Unit between them as shown in
the diagram below.
The calculation result is displayed on (i.e. output to) the CH2 Amplifier Unit. Connect
the CH2 output cable to the external device to enable external control.
Connections, p. 30
The CH1 Amplifier Unit will display (output) the measurement result for the CH1 Sensor Head only.
Mounting the Sensor Head to the Inspection Device
Refer to the following diagram and prepare the mounting jigs. Mount the Sensor Heads
facing each other.
Installing Sensor Heads, p. 26
MAIN APPLICATIONS AND SETTING METHODS
Mounting jigs
Section 4
CH1
Calculation Unit
CH2
Operation Manual
ZX-T
53