Omron ZX-T Operation Manual page 34

Calculating Units
Use Calculating Units to connect Amplifier Units when making calculations between
Amplifier Units.
A maximum of 8 Amplifier Units can be connected using Calculating Units.
Provide power to all connected Amplifier Units.
Connect the linear grounds of all Amplifier Units to each other.
Connection Method
1.
Open the connector covers on the Amplifier Units.
Open the connector covers by lifting and sliding them open.
2.
Mount the Calculating Unit to the DIN Track.
3.
Slide and connect the Calculating Unit to the Amplifier Unit connector.
4.
Slide and connect the second Amplifier Unit to the Calculating Unit connector.
Perform the above operation in the reverse order to remove Calculating Units.
PREPARATIONS FOR MEASUREMENT
2
4
3
1
1
Operation Manual
Section 2
ZX-T
31